EMG x TTI TR-1 10" M4E1 Ultralight (SBR - M-LOK - Black - TTI109M-10) with Pre-Installed Wolverine INFERNO Gen 2 Engine, Spartan Board & FCU Battery (I)
£603.99
EMG x TTI TR-1 10" M4E1 Ultralight (SBR - M-LOK - Black - TTI109M-10) with Pre-Installed Wolverine INFERNO Gen 2 Engine, Spartan Board & FCU Battery (I)
£603.99
Skip to product information
Do you have a UKARA Defence?
By confirming, you verify that you are over 18 and have a valid UKARA Defence.
You must tick the box to continue.
Pickup available at The Vault
Usually ready in 2-4 days
Loading form…
Spend £150+. Get the Kit. Play for FREE.
🟠 Shop Now & Qualify
Product Overview
The EMG x TTI TR-1 10" M4E1 Ultralight (TTI109M-10) is an officially licensed Taran Tactical Innovations SBR that comes assembled as an HPA rifle.
It has engraved TTI and M4E1 trademarks on a lightweight alloy receiver set and a slim 10" M-LOK rail. The short length makes it quick to handle in rooms and on target transitions.
The pre-installed Wolverine INFERNO Gen 2 is a single-solenoid HPA engine with independent nozzle movement, so the nozzle is positioned before each shot. It is controlled by the Spartan Board FCU, which lets you set dwell, rate of fire and burst modes through the trigger, with no external programming unit needed. An FCU battery is included; you supply the HPA air line and regulator.
Key Features
- Officially licensed Taran Tactical Innovations design
- Engraved TTI and M4E1 trademarks
- Lightweight alloy M4E1 receiver set
- Slim 10" M-LOK rail
- Pre-installed Wolverine INFERNO Gen 2 HPA engine
- Single solenoid with independent nozzle movement
- Spartan Board FCU: set dwell, rate of fire and burst modes via the trigger
- FCU battery included
- FPS and rate of fire adjusted through your HPA regulator and FCU settings
Specifications
- Brand: EMG (TTI licensed)
- Model: TR-1 10" M4E1 Ultralight (TTI109M-10)
- Type: HPA rifle
- Power Source: HPA (high pressure air)
- Engine: Wolverine INFERNO Gen 2
- Control Board: Wolverine Spartan Board FCU
- Air Fitting: Standard QD
- Operating Pressure: Typically 60 to 120 PSI
- Handguard: 10" M-LOK
- Colour: Black
What's Included
- EMG x TTI TR-1 10" with pre-installed Wolverine INFERNO Gen 2 and Spartan Board
- FCU battery
Additional Information
Connect the FCU battery to the Spartan Board wiring harness, then attach your HPA air line (standard QD fitting) to the line at the grip. Set your regulator within the recommended operating range (typically 60 to 120 PSI) before firing, and disconnect the FCU battery when storing the gun.
Defence Required
This product requires valid Defence Evidence or a legitimate reason to purchase, in accordance with UK law.
Defence details will be requested at checkout.
18+ Age Restriction
You must be 18 years or older to purchase this item.
Battery Safety
NiMH batteries must only be charged using NiMH-compatible chargers.
Using an incorrect charger may cause damage or fire risk.